Führe statische Analyse (SAST) auf der Codebasis aus und suche im Datenfluss nach dem unsicheren Muster.
Exposure of Sensitive System Information Due to Uncleared Debug Information
This vulnerability occurs when hardware fails to erase sensitive data like cryptographic keys and intermediate values before entering debug mode, leaving them exposed.
What is CWE-1258?
Real-world CVEs caused by CWE-1258
-
Uncleared debug information in memory accelerator for SSD product exposes sensitive system information
-
Rust library leaks Oauth client details in application debug logs
Angreiferpfad Schritt für Schritt
- 1
A cryptographic core in a System-On-a-Chip (SoC) is used for cryptographic acceleration and implements several cryptographic operations (e.g., computation of AES encryption and decryption, SHA-256, HMAC, etc.). The keys for these operations or the intermediate values are stored in registers internal to the cryptographic core. These internal registers are in the Memory Mapped Input Output (MMIO) space and are blocked from access by software and other untrusted agents on the SoC. These registers are accessible through the debug and test interface.
- 2
The following code example is extracted from the AES wrapper module, aes1_wrapper, of the Hack@DAC'21 buggy OpenPiton System-on-Chip (SoC). Within this wrapper module are four memory-mapped registers: core_key, core_key0, core_key1, and core_key2. Core_key0, core_key1, and core_key2 hold encryption/decryption keys. The core_key register selects a key and sends it to the underlying AES module to execute encryption/decryption operations. Debug mode in processors and SoCs facilitates design debugging by granting access to internal signal/register values, including physical pin values of peripherals/core, fabric bus data transactions, and inter-peripheral registers. Debug mode allows users to gather detailed, low-level information about the design to diagnose potential issues. While debug mode is beneficial for diagnosing processors or SoCs, it also introduces a new attack surface for potential attackers. For instance, if an attacker gains access to debug mode, they could potentially read any content transmitted through the fabric bus or access encryption/decryption keys stored in cryptographic peripherals. Therefore, it is crucial to clear the contents of secret registers upon entering debug mode. In the provided example of flawed code below, when debug_mode_i is activated, the register core_key0 is set to zero to prevent AES key leakage during debugging. However, this protective measure is not applied to the core_key1 register [REF-1435], leaving its contents uncleared during debug mode. This oversight enables a debugger to access sensitive information. Failing to clear sensitive data during debug mode may lead to unauthorized access to secret keys and compromise system security.
- 3
To address the issue, it is essential to ensure that the register is cleared and zeroized after activating debug mode on the SoC. In the correct implementation illustrated in the good code below, core_keyx registers are set to zero when debug mode is activated [REF-1436].
Vulnerable Other
A cryptographic core in a System-On-a-Chip (SoC) is used for cryptographic acceleration and implements several cryptographic operations (e.g., computation of AES encryption and decryption, SHA-256, HMAC, etc.). The keys for these operations or the intermediate values are stored in registers internal to the cryptographic core. These internal registers are in the Memory Mapped Input Output (MMIO) space and are blocked from access by software and other untrusted agents on the SoC. These registers are accessible through the debug and test interface.
In the above scenario, registers that store keys and intermediate values of cryptographic operations are not cleared when system enters debug mode. An untrusted actor running a debugger may read the contents of these registers and gain access to secret keys and other sensitive cryptographic information. Secure Other
Whenever the chip enters debug mode, all registers containing security-sensitive data are be cleared rendering them unreadable. How to prevent CWE-1258
- Architecture and Design Whenever debug mode is enabled, all registers containing sensitive assets must be cleared.
How to detect CWE-1258
Führe dynamische Application-Security-Tests gegen den Live-Endpoint aus.
Beobachte Runtime-Logs auf ungewöhnliche Exception-Traces, fehlerhafte Eingaben oder Versuche, Autorisierung zu umgehen.
Code Review: Markiere jeden neuen Code, der Eingaben von dieser Oberfläche ohne validierte Framework-Helper verarbeitet.
Plexicus erkennt CWE-1258 automatisch und öffnet in unter 60 Sekunden einen Fix-PR.
Codex Remedium scannt jeden Commit, identifiziert genau diese Schwachstelle und liefert einen reviewer-ready Pull Request mit dem Patch. Keine Tickets. Keine Hand-offs.
Frequently asked questions
Was ist CWE-1258?
This vulnerability occurs when hardware fails to erase sensitive data like cryptographic keys and intermediate values before entering debug mode, leaving them exposed.
Wie gravierend ist CWE-1258?
MITRE hat für diese Schwachstelle keine Exploit-Wahrscheinlichkeit veröffentlicht. Behandle sie als mittlere Auswirkung, bis dein Threat Model anderes belegt.
Welche Sprachen oder Plattformen sind von CWE-1258 betroffen?
MITRE lists the following affected platforms: Not OS-Specific, Not Architecture-Specific, Not Technology-Specific.
Wie kann ich CWE-1258 verhindern?
Whenever debug mode is enabled, all registers containing sensitive assets must be cleared.
Wie erkennt und behebt Plexicus CWE-1258?
Die SAST-Engine von Plexicus erkennt die Datenfluss-Signatur von CWE-1258 bei jedem Commit. Bei einem Treffer öffnet unser Codex-Remedium-Agent einen Fix-PR mit korrigiertem Code, Tests und einer einzeiligen Zusammenfassung für den Reviewer.
Wo erfahre ich mehr über CWE-1258?
MITRE veröffentlicht die kanonische Definition unter https://cwe.mitre.org/data/definitions/1258.html. Für ergänzende Hinweise kannst du auch die OWASP- und NIST-Dokumentation heranziehen.
Weaknesses related to CWE-1258
Improper Removal of Sensitive Information Before Storage or Transfer
This vulnerability occurs when an application stores or transmits a resource containing sensitive data without properly cleaning it first,…
Sensitive Information in Resource Not Removed Before Reuse
This vulnerability occurs when a system releases a resource like memory or a file for reuse but fails to erase the sensitive data it…
Further reading
- MITRE — offizielle CWE-1258 https://cwe.mitre.org/data/definitions/1258.html
- Bad Code aes1_wrapper.sv https://github.com/HACK-EVENT/hackatdac21/blob/bcae7aba7f9daee8ad2cfd47b997ac7ad6611034/piton/design/chip/tile/ariane/src/aes1/aes1_wrapper.sv#L149:L155
- Good Code aes1_wrapper.sv https://github.com/HACK-EVENT/hackatdac21/blob/e3234bb15f07f213de08ec91a9ec08d2a16b5714/piton/design/chip/tile/ariane/src/aes1/aes1_wrapper.sv#L149:L155
Schluss mit dem Bezahlen pro Entwickler.
Schließ den Kreislauf.
Plexicus ist die KI-native ASPM, die scannt, filtert, fixt, pentestet und erklärt — autonom. Unbegrenzte Entwickler, unbegrenzte Repos, Fair-Use-KI-Aktionen. Echter kostenloser Tarif, €269/mo jährlich, wenn du bereit bist.