CWE-806 Variant Incomplete

Buffer Access Using Size of Source Buffer

This vulnerability occurs when a program uses the size of the source data buffer to control reading or writing to a smaller destination buffer, potentially accessing memory outside the destination's…

Definition

What is CWE-806?

This vulnerability occurs when a program uses the size of the source data buffer to control reading or writing to a smaller destination buffer, potentially accessing memory outside the destination's allocated bounds.
This flaw typically happens during copy or manipulation operations like `memcpy`, `strncpy`, or custom loops. The developer incorrectly uses the length or size of the *source* buffer (which might be large or untrusted) as the limit for the operation, instead of using the smaller, safe capacity of the *destination* buffer. This mismatch sets the stage for a buffer overflow. When executed, this can corrupt adjacent memory, crash the application, or allow an attacker to inject and run malicious code. To prevent it, always explicitly validate that the destination buffer is large enough for the operation, and use its specific size limit—not the source's size—as the guard for any data transfer.
Auswirkungen in der Praxis

Real-world CVEs caused by CWE-806

Bisher sind in MITREs Katalog keine öffentlichen CVE-Referenzen mit dieser CWE verknüpft.

Wie Angreifer es ausnutzen

Angreiferpfad Schritt für Schritt

  1. 1

    In the following example, the source character string is copied to the dest character string using the method strncpy.

  2. 2

    However, in the call to strncpy the source character string is used within the sizeof call to determine the number of characters to copy. This will create a buffer overflow as the size of the source character string is greater than the dest character string. The dest character string should be used within the sizeof call to ensure that the correct number of characters are copied, as shown below.

  3. 3

    In this example, the method outputFilenameToLog outputs a filename to a log file. The method arguments include a pointer to a character string containing the file name and an integer for the number of characters in the string. The filename is copied to a buffer where the buffer size is set to a maximum size for inputs to the log file. The method then calls another method to save the contents of the buffer to the log file.

  4. 4

    However, in this case the string copy method, strncpy, mistakenly uses the length method argument to determine the number of characters to copy rather than using the size of the local character string, buf. This can lead to a buffer overflow if the number of characters contained in character string pointed to by filename is larger then the number of characters allowed for the local character string. The string copy method should use the buf character string within a sizeof call to ensure that only characters up to the size of the buf array are copied to avoid a buffer overflow, as shown below.

Verwundbares Codebeispiel

Vulnerable C

In the following example, the source character string is copied to the dest character string using the method strncpy.

Verwundbar C 
...
  char source[21] = "the character string";
  char dest[12];
  strncpy(dest, source, sizeof(source)-1);
  ...
Sicheres Codebeispiel

Secure C

However, in the call to strncpy the source character string is used within the sizeof call to determine the number of characters to copy. This will create a buffer overflow as the size of the source character string is greater than the dest character string. The dest character string should be used within the sizeof call to ensure that the correct number of characters are copied, as shown below.

Sicher C 
...
  char source[21] = "the character string";
  char dest[12];
  strncpy(dest, source, sizeof(dest)-1);
  ...
What changed: the unsafe sink is replaced (or the input is validated/escaped) so the same payload no longer triggers the weakness.
Präventions-Checkliste

How to prevent CWE-806

  • Architecture and Design Use an abstraction library to abstract away risky APIs. Examples include the Safe C String Library (SafeStr) by Viega, and the Strsafe.h library from Microsoft. This is not a complete solution, since many buffer overflows are not related to strings.
  • Operation / Build and Compilation Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index checking. D3-SFCV (Stack Frame Canary Validation) from D3FEND [REF-1334] discusses canary-based detection in detail.
  • Implementation Programmers should adhere to the following rules when allocating and managing their applications memory: Double check that your buffer is as large as you specify. When using functions that accept a number of bytes to copy, such as strncpy(), be aware that if the destination buffer size is equal to the source buffer size, it may not NULL-terminate the string. Check buffer boundaries if calling this function in a loop and make sure there is no danger of writing past the allocated space. Truncate all input strings to a reasonable length before passing them to the copy and concatenation functions.
  • Operation / Build and Compilation Run or compile the software using features or extensions that randomly arrange the positions of a program's executable and libraries in memory. Because this makes the addresses unpredictable, it can prevent an attacker from reliably jumping to exploitable code. Examples include Address Space Layout Randomization (ASLR) [REF-58] [REF-60] and Position-Independent Executables (PIE) [REF-64]. Imported modules may be similarly realigned if their default memory addresses conflict with other modules, in a process known as "rebasing" (for Windows) and "prelinking" (for Linux) [REF-1332] using randomly generated addresses. ASLR for libraries cannot be used in conjunction with prelink since it would require relocating the libraries at run-time, defeating the whole purpose of prelinking. For more information on these techniques see D3-SAOR (Segment Address Offset Randomization) from D3FEND [REF-1335].
  • Operation Use a CPU and operating system that offers Data Execution Protection (using hardware NX or XD bits) or the equivalent techniques that simulate this feature in software, such as PaX [REF-60] [REF-61]. These techniques ensure that any instruction executed is exclusively at a memory address that is part of the code segment. For more information on these techniques see D3-PSEP (Process Segment Execution Prevention) from D3FEND [REF-1336].
  • Build and Compilation / Operation Most mitigating technologies at the compiler or OS level to date address only a subset of buffer overflow problems and rarely provide complete protection against even that subset. It is good practice to implement strategies to increase the workload of an attacker, such as leaving the attacker to guess an unknown value that changes every program execution.
Erkennungssignale

How to detect CWE-806

SAST High

Führe statische Analyse (SAST) auf der Codebasis aus und suche im Datenfluss nach dem unsicheren Muster.

DAST Moderate

Führe dynamische Application-Security-Tests gegen den Live-Endpoint aus.

Runtime Moderate

Beobachte Runtime-Logs auf ungewöhnliche Exception-Traces, fehlerhafte Eingaben oder Versuche, Autorisierung zu umgehen.

Code review Moderate

Code Review: Markiere jeden neuen Code, der Eingaben von dieser Oberfläche ohne validierte Framework-Helper verarbeitet.

Plexicus Auto-Fix

Plexicus erkennt CWE-806 automatisch und öffnet in unter 60 Sekunden einen Fix-PR.

Codex Remedium scannt jeden Commit, identifiziert genau diese Schwachstelle und liefert einen reviewer-ready Pull Request mit dem Patch. Keine Tickets. Keine Hand-offs.

Demo anfordern Plexicus kostenlos testen
Häufig gestellte Fragen

Frequently asked questions

Was ist CWE-806?

This vulnerability occurs when a program uses the size of the source data buffer to control reading or writing to a smaller destination buffer, potentially accessing memory outside the destination's allocated bounds.

Wie gravierend ist CWE-806?

MITRE hat für diese Schwachstelle keine Exploit-Wahrscheinlichkeit veröffentlicht. Behandle sie als mittlere Auswirkung, bis dein Threat Model anderes belegt.

Welche Sprachen oder Plattformen sind von CWE-806 betroffen?

MITRE lists the following affected platforms: C, C++.

Wie kann ich CWE-806 verhindern?

Use an abstraction library to abstract away risky APIs. Examples include the Safe C String Library (SafeStr) by Viega, and the Strsafe.h library from Microsoft. This is not a complete solution, since many buffer overflows are not related to strings. Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which…

Wie erkennt und behebt Plexicus CWE-806?

Die SAST-Engine von Plexicus erkennt die Datenfluss-Signatur von CWE-806 bei jedem Commit. Bei einem Treffer öffnet unser Codex-Remedium-Agent einen Fix-PR mit korrigiertem Code, Tests und einer einzeiligen Zusammenfassung für den Reviewer.

Wo erfahre ich mehr über CWE-806?

MITRE veröffentlicht die kanonische Definition unter https://cwe.mitre.org/data/definitions/806.html. Für ergänzende Hinweise kannst du auch die OWASP- und NIST-Dokumentation heranziehen.

Verwandte Schwachstellen

Weaknesses related to CWE-806

CWE-805 Parent

Buffer Access with Incorrect Length Value

This vulnerability occurs when software reads from or writes to a buffer using a loop or sequential operation, but mistakenly calculates…

Ressourcen

Further reading

Bereit, wenn du es bist

Schluss mit dem Bezahlen pro Entwickler.
Schließ den Kreislauf.

Plexicus ist die KI-native ASPM, die scannt, filtert, fixt, pentestet und erklärt — autonom. Unbegrenzte Entwickler, unbegrenzte Repos, Fair-Use-KI-Aktionen. Echter kostenloser Tarif, €269/mo jährlich, wenn du bereit bist.

Kostenlos starten Demo buchen