CWE-806 Variante Incomplet

Buffer Access Using Size of Source Buffer

This vulnerability occurs when a program uses the size of the source data buffer to control reading or writing to a smaller destination buffer, potentially accessing memory outside the destination's…

Définition

What is CWE-806?

This flaw typically happens during copy or manipulation operations like `memcpy`, `strncpy`, or custom loops. The developer incorrectly uses the length or size of the *source* buffer (which might be large or untrusted) as the limit for the operation, instead of using the smaller, safe capacity of the *destination* buffer. This mismatch sets the stage for a buffer overflow. When executed, this can corrupt adjacent memory, crash the application, or allow an attacker to inject and run malicious code. To prevent it, always explicitly validate that the destination buffer is large enough for the operation, and use its specific size limit—not the source's size—as the guard for any data transfer.

Impact réel

Real-world CVEs caused by CWE-806

Aucune référence CVE publique n'est liée à ce CWE dans le catalogue MITRE pour le moment.

Comment les attaquants l'exploitent

Parcours de l'attaquant étape par étape

1
In the following example, the source character string is copied to the dest character string using the method strncpy.
2
However, in the call to strncpy the source character string is used within the sizeof call to determine the number of characters to copy. This will create a buffer overflow as the size of the source character string is greater than the dest character string. The dest character string should be used within the sizeof call to ensure that the correct number of characters are copied, as shown below.
3
In this example, the method outputFilenameToLog outputs a filename to a log file. The method arguments include a pointer to a character string containing the file name and an integer for the number of characters in the string. The filename is copied to a buffer where the buffer size is set to a maximum size for inputs to the log file. The method then calls another method to save the contents of the buffer to the log file.
4
However, in this case the string copy method, strncpy, mistakenly uses the length method argument to determine the number of characters to copy rather than using the size of the local character string, buf. This can lead to a buffer overflow if the number of characters contained in character string pointed to by filename is larger then the number of characters allowed for the local character string. The string copy method should use the buf character string within a sizeof call to ensure that only characters up to the size of the buf array are copied to avoid a buffer overflow, as shown below.

Exemple de code vulnérable

Vulnerable C

In the following example, the source character string is copied to the dest character string using the method strncpy.

Vulnérable C

...
  char source[21] = "the character string";
  char dest[12];
  strncpy(dest, source, sizeof(source)-1);
  ...

Exemple de code sécurisé

Secure C

However, in the call to strncpy the source character string is used within the sizeof call to determine the number of characters to copy. This will create a buffer overflow as the size of the source character string is greater than the dest character string. The dest character string should be used within the sizeof call to ensure that the correct number of characters are copied, as shown below.

Sécurisé C

...
  char source[21] = "the character string";
  char dest[12];
  strncpy(dest, source, sizeof(dest)-1);
  ...

What changed: the unsafe sink is replaced (or the input is validated/escaped) so the same payload no longer triggers the weakness.

Liste de contrôle de prévention

How to prevent CWE-806

Architecture and Design Use an abstraction library to abstract away risky APIs. Examples include the Safe C String Library (SafeStr) by Viega, and the Strsafe.h library from Microsoft. This is not a complete solution, since many buffer overflows are not related to strings.
Operation / Build and Compilation Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index checking. D3-SFCV (Stack Frame Canary Validation) from D3FEND [REF-1334] discusses canary-based detection in detail.
Implementation Programmers should adhere to the following rules when allocating and managing their applications memory: Double check that your buffer is as large as you specify. When using functions that accept a number of bytes to copy, such as strncpy(), be aware that if the destination buffer size is equal to the source buffer size, it may not NULL-terminate the string. Check buffer boundaries if calling this function in a loop and make sure there is no danger of writing past the allocated space. Truncate all input strings to a reasonable length before passing them to the copy and concatenation functions.
Operation / Build and Compilation Run or compile the software using features or extensions that randomly arrange the positions of a program's executable and libraries in memory. Because this makes the addresses unpredictable, it can prevent an attacker from reliably jumping to exploitable code. Examples include Address Space Layout Randomization (ASLR) [REF-58] [REF-60] and Position-Independent Executables (PIE) [REF-64]. Imported modules may be similarly realigned if their default memory addresses conflict with other modules, in a process known as "rebasing" (for Windows) and "prelinking" (for Linux) [REF-1332] using randomly generated addresses. ASLR for libraries cannot be used in conjunction with prelink since it would require relocating the libraries at run-time, defeating the whole purpose of prelinking. For more information on these techniques see D3-SAOR (Segment Address Offset Randomization) from D3FEND [REF-1335].
Operation Use a CPU and operating system that offers Data Execution Protection (using hardware NX or XD bits) or the equivalent techniques that simulate this feature in software, such as PaX [REF-60] [REF-61]. These techniques ensure that any instruction executed is exclusively at a memory address that is part of the code segment. For more information on these techniques see D3-PSEP (Process Segment Execution Prevention) from D3FEND [REF-1336].
Build and Compilation / Operation Most mitigating technologies at the compiler or OS level to date address only a subset of buffer overflow problems and rarely provide complete protection against even that subset. It is good practice to implement strategies to increase the workload of an attacker, such as leaving the attacker to guess an unknown value that changes every program execution.

Signaux de détection

How to detect CWE-806

SAST High

Exécuter une analyse statique (SAST) sur le code source à la recherche du motif non sécurisé dans le flux de données.

DAST Moderate

Exécuter des tests de sécurité applicative dynamique (DAST) contre le point de terminaison en ligne.

Runtime Moderate

Surveiller les journaux runtime pour détecter des traces d'exception inhabituelles, des entrées malformées ou des tentatives de contournement d'autorisation.

Code review Moderate

Revue de code : signaler tout nouveau code qui traite les entrées de cette surface sans utiliser les helpers du framework validés.

Correction automatique Plexicus

Plexicus détecte automatiquement CWE-806 et ouvre une PR de correction en moins de 60 secondes.

Codex Remedium analyse chaque commit, identifie cette faiblesse précise et livre une pull request prête à être relue avec le correctif. Pas de tickets. Pas de transferts.

Obtenir une démo Essayer Plexicus gratuitement

Questions fréquentes

Frequently asked questions

Qu'est-ce que CWE-806 ?

Quelle est la gravité de CWE-806 ?

MITRE n'a pas publié de note de probabilité d'exploitation pour cette faiblesse. Traitez-la comme un impact moyen jusqu'à ce que votre modèle de menace prouve le contraire.

Quels langages ou plateformes sont affectés par CWE-806 ?

MITRE lists the following affected platforms: C, C++.

Comment puis-je prévenir CWE-806 ?

Use an abstraction library to abstract away risky APIs. Examples include the Safe C String Library (SafeStr) by Viega, and the Strsafe.h library from Microsoft. This is not a complete solution, since many buffer overflows are not related to strings. Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which…

Comment Plexicus détecte et corrige CWE-806 ?

Le moteur SAST de Plexicus reconnaît la signature de flux de données de CWE-806 à chaque commit. Lorsqu'une correspondance est trouvée, notre agent Codex Remedium ouvre une PR de correction avec le code corrigé, les tests et un résumé d'une ligne pour le relecteur.

Où puis-je en savoir plus sur CWE-806 ?

MITRE publie la définition canonique à https://cwe.mitre.org/data/definitions/806.html. Vous pouvez également consulter la documentation OWASP et NIST pour des conseils adjacents.

Faiblesses associées

Weaknesses related to CWE-806

CWE-805 Parent

Buffer Access with Incorrect Length Value

This vulnerability occurs when software reads from or writes to a buffer using a loop or sequential operation, but mistakenly calculates…

Ressources

Arrêtez de payer par développeur.
Commencez à fermer la boucle.

Plexicus est l'ASPM natif IA qui scanne, filtre, corrige, penteste et explique — de façon autonome. Développeurs illimités, dépôts illimités, actions IA à usage équitable. Vrai niveau gratuit, €269/mo annuel quand vous êtes prêt.

Commencer gratuitement Réserver une démo